Acomdata.com RPDOCKU2FA - Manual (Page 39)

Q: The voltage meter doesn’t seem to work properly.
A: Like the Stack light, the voltage meter is only active when one or
more RocketPod modules are stacked onto the DockPod and the
DockPod is turned on.
Q: Do I need to worry about the exposed Stack&Play connector
when my DockPod or RocketPod stack is powered on?
A: Since every RocketPod peripheral has a connector built into the
top, you will always have an exposed or free connector with the last
(top) module in a stack. Free connectors are inactive; they do not
have power, so it is perfectly safe to touch them. However, we do
recommend that you cover the free connector using the Connector
Cap that comes with every stack-on RocketPod peripheral in order to
protect the connector and prevent dust from collecting on it.
Q: When I leave my computer idle for a while and come back, my
RocketPod modules won’t work properly.
A: The most likely cause is that your computer is going into sleep
mode. The immediate solution is to restart your computer. To pre-
vent this problem from recurring, set your computer to never go into
sleep mode. (See the documentation that came with your computer
for instructions.)
37