Lenovo ThinkServer RS140 User Manual
Page 98
Advertising
7. Remove the four screws that secure the 2.5-inch hard disk drive to the bracket. Then, lift the 2.5-inch
hard disk drive up to remove it from the bracket.
Figure 58. Removing the 2.5-inch hard disk drive from the bracket
8. Position the new 2.5-inch hard disk drive into the bracket and then install the four screws to secure the
new 2.5-inch hard disk drive.
Figure 59. Installing the 2.5-inch hard disk drive to the bracket
86
ThinkServer RS140 User Guide and Hardware Maintenance Manual
Advertising