Atlantis Land NETMASTER F8POE - Manual (Page 25)

25
For the Legacy devices that are not yet compatible, the PoE port will not offer the
power to this device. This feature allows users to freely and safely mix legacy and
Power over LAN compatible devices on their network.
The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in
half and full duplex mode using two pair of Category 5 cable.
These RJ45 ports are Auto-MDI type port. The Switch can auto transform to MDI-II or
MDI-X type, so you can just make an easy connection that without worrying if you are
using a standard or crossover RJ45 cable.
4. External Components
4.1 Front Panel
The figure below shows the front panels of the switch.
Comprehensive LED indicators display the status of the switch and the network.
LED MEANING
PWR (Power Indicator)
On: When the Power LED lights on, the Switch
is receiving power.