Atlantis Land NETMASTER F8POE - Manual (Page 27)

27
4.2 Rear Panel
PORTS MEANING
PoE Ports (1-4)
These ports are PoE Enabled ports, the PoE port will
automatically activated when a compatible terminal is
identified, the Switch will supply power through the
Ethernet port to the connected PoE device.
For the Legacy devices that are not yet compatible,
the PoE port will not offer the power to this device.
This feature allows users to freely and safely mix
legacy and Power over LAN compatible devices on
their network
These ports support network speeds of either 10Mbps
or 100Mbps, and can operate in half- and full- duplex
transfer modes. These ports also supports automatic
MDI/MDIX crossover detection function gives true
“plug and play” capability, just need to plug-in the
network cable to the hub directly and don’t care if the
end node is NIC (Network Interface Card) or switch
and hub.
Ethernet Ports (5-8)
These ports support network speeds of either 10Mbps
or 100Mbps, and can operate in half- and full- duplex
transfer modes. These ports also supports automatic
MDI/MDIX crossover detection function gives true
“plug and play” capability, just need to plug-in the
network cable to the hub directly and don’t care if the
end node is NIC (Network Interface Card) or switch
and hub.