Axis Communications 216FD/FD-V - Manual (Page 13)

13 AXIS 216FD/FD-V - Accessing the Camera
AMC audio controls
There are audio controls for controlling the client computer’s speaker output. These
controls are only available when audio is enabled, see AXIS Media Control, on page 17
and Audio, on page 21.
Click the Speaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
Use the sliders to control the volume on the speaker and
microphone. The volume can be set between 0 and 100.
The Buffer slider controls the size of the buffer for audio. A higher
level will reduce audio break-up, but may introduce a noticeable
lag in audio transmission. There are four settings i.e. min, low,
high and max.
When using Half-duplex mode, this button toggles between allowing you to
speak and listen. The first icon indicates that you can talk and the speaker
attached to the camera will play your voice. The second indicates that you will
hear audio from the camera, but no audio will be sent to any web clients.
When in simplex talk mode, the icon toggles between allowing you to speak and is
dimmed when you do not want other clients to receive any audio.