ASRock 939Dual-SATA2 - Manual (Page 30)

3 0 3 0 3 0 3 0 3 0
OnBoard IDE Controller
You may enable either the primary IDE channel or the secondary IDE channel.
Or you may enable both the primary and the secondary IDE channels by
selecting [Both]. Set to [Disabled] will disable the both. Configuration options:
[Disabled], [Primary], [Secondary], [Both].
OnBoard SATA Controller
Enable the onboard SATA controller by selecting [Enabled]. The default
value of this option is [Enabled]. Configuration options: [Enabled], [Disabled],
[Auto].
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [RAID]. Configuration options: [RAID], [non-RAID].
OnBoard SATAII Controller
Enable the onboard SATAII controller by selecting [Enabled]. The default
value of this option is [Enabled]. Configuration options: [Enabled], [Disabled],
[Auto].
SATAII Operation Mode
Use this item to adjust SATAII Operation Mode. The default value of this
option is [IDE]. Configuration options: [IDE], [SATA].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction,
which can be applied to the configurations of “Primary IDE Slave”, “Sec-
ondary IDE Master”, and “Secondary IDE Slave” as well.