ASRock 939Dual-SATA2 - Manual (Page 33)

3 3 3 3 3 3 3 3 3 3
BIOS SETUP UTILITY
Floppy Configuration Select the type of
floppy drive
connected to the
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Floppy A
Floppy B
[1.44 MB 3 "]
[Disabled]
1 2
BIOS SETUP UTILITY
Configure Super IO Chipset Allow BIOS to Enable
or Disable Floppy
Controller.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
OnBoard Floppy Controller
Serial Port Address
Infrared Port Address
Parallel Port Address
Parallel Port Mode
EPP Version
ECP Mode DMA Channel
Parallel Port IRQ
OnBoard Game Port
OnBoard MIDI Port
[Enabled]
[3F8 / IRQ4]
[Disabled]
[378]
[ECP + EPP]
[1.9]
[DMA3]
[IRQ7]
[Enabled]
[Disabled]
3.3.6 3.3.6 3.3.6 3.3.6 3.3.6 Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration Floppy Configuration
In this section, you may configure the type of your floppy drive.
3.3.7 3.3.7 3.3.7 3.3.7 3.3.7 Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].