Avital Hurricane 2 - Manual (Page 3)

þ Remote- Controlled Si lent Arm/Dis arm — At any time, you can press
a button on your remote control to silently arm or disarm your system.
þ User- Programmable Long- Term Si lent Arm/Dis arm — This feature
allows you to completely disable the arm/disarm siren chirps until you
decide to restore them.
þ Pro tected Valet Mode — Disables all alarm functions while your
vehicle is serviced by mechanics, car wash personnel or driven by valet
attendants.
þ Key less En try in Valet — Allows you to control your door locks and
activate optional accessories while in Protected Valet Mode.
þ In te rior Light Il lu mi na tion — When remotely disarmed, the alarm
system turns on the interior lights for 30 seconds or until the ignition key
is turned on.
þ Vis ual Con fir ma tions — Your vehicle’s parking lights will flash to
confirm remote arming, disarming and alarm activation.
þ User- Programmable Active/Pas sive Arm ing — The alarm system
can be programmed to arm with the remote control (active arming) or
arm itself automatically (passive arming).
þ User- Programmable Pas sive Door Lock — Allows you to program
the system to automatically lock the doors every time the alarm passively
arms.
þ Vis ual Pas sive Arm ing In di ca tion — The LED will flash rapidly to
indicate the alarm system is in a 30 second arming delay.
þ User- Programmable Pas sive Armed Con fir ma tion — After the 30
second arming delay, the system will audibly and visually confirm that it
passively armed.
þ Auto matic Sys tem Check — Automatically tests all triggers and
sensors every time you remotely arm your system.
þ Pre vi ous In tru sion Alert — Audibly warns you if the alarm was
triggered while you were away.
3
Hurricane 2 Owner's Manual