Audible 2220 - Manual (Page 30)

30
Modify a Connection
This command modifies connection information for a remote system. To modify a connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to modify.
3. Click the Modify button on the toolbar or select the “Modify” command from the “Operation” menu.
4. Enter new connection information in the popup window, and click OK to apply the changes.
Note: The System Address cannot be modified. If you insist on modifying this item, you must first delete
this connection and then add a new connection. In addition, the connected system cannot be modified –
you must first disconnect from this system.
Delete a Connection
This command deletes a remote system from the connection list. To delete a connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to delete.
3. Click the “Delete” button on the toolbar or select the “Delete” command from the “Operation” menu.
4. A warning message will be displayed. Click “Yes” to delete the item. Select No to cancel this command.
Connect to a Remote System
This command establishes a connection to a remote system for RAID management. To connect to a remote
system:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the remote system you to establish a connection with.
3. Click the “Connect” button on the toolbar or select the “Connect” command from the “Operation” menu.
4. Enter the appropriate Login information in the popup window.