Audible 2220 - Manual (Page 44)

44
4 – Updating the Driver
To update the driver, simply reinstall the driver following the steps in previous section, " Install
Rocket RAID 2220 Driver on an Existing System ".
Note: If the driver is loaded in initrd (when system is installed onto a disk or array attached to the
Rocket RAID 2220), you need to run the mkinitrd command to update the initrd file. If you are using the
lilo boot loader, run lilo again (# lilo).
5 - Uninstalling the Driver
To uninstall the RocketRAID 2220 driver
Note: The driver cannot be uninstalled while the system is booted from a disk or array attached to the
Rocket RAID 2220.
To uninstall the driver, remove the lines added to /etc/modules.conf and /etc/fstab.