Airlink UG-ASW232-1103 - Manual (Page 15)

AirLink+ 15
32-Port 10/100Mbps Ethernet Switch User Guide
Connecting Network Cable
The Switch supports 10Mbps Ethernet or 100Mbps Fast
Ethernet and it runs both in half and full duplex mode.
These ports are Auto-MDI type port. The Switch can auto
transform to MDI-II or MDI-X type, so you can just make an
easy connection that without worrying if you are using a
standard or crossover cable.
Power On
The 32-port 10/100Mbps Ethernet Switch can be used with
AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch's
power supply will adjust to the local power source
automatically and may be turned on without having any or
all LAN segment cables connected.
External Components
This section identifies all the major external components of
the switch. Both the front and rear panel is shown, followed
by a description of each panel feature. The indicator panel is
described in detail in the next chapter.
Front Panel
Figure 3 shows the Switch’s front panel.