Airlink UG-ASW232-1103 - Manual (Page 17)

AirLink+ 17
32-Port 10/100Mbps Ethernet Switch User Guide
Module Slots
The module slots are used to install module options for
100 BASE-FX connection.
AC Power Connector
Plug the power cord into the AC power connector.
Figure 4. Rear Panel
AC Power Connector Module Slot
Rear of Switch
I
O
Twisted-Pair Ports
These ports supports automatic MDI/MDIX crossover
detection function gives true 'plug and play' capability
without the need of confusing crossover cables or crossover
ports.
With the Auto-MDI function, you just need to plug-in the
network cable to the hub directly and no need to care if the
end node is Network Interface Card (NIC) or switches and
hubs.
Rear Panel
Figure 4 shows the Switch’s rear panel.