Konica Minolta eCopy - Manual (Page 161)

eCopy ShareScan OP Installation and Setup Guide | 153
6 Select the connector profiles that you want to publish and click OK .
7 In the Create Profile window, select additional connector profiles that you want to publish. You
can publish up to nine connector profiles to any device.
8 When you have finished selecting the connector profiles to include in the group, click OK . The
new group of profiles is listed in the Publish Connector Profiles window.
To add target devices:
1 In the Publish Connector Profiles window, click Manage .
> If the device that you want to add is not on the list, click Add Devices and go to step 2.
> If the device that you want to add is on the list, select its check box and click Done .
2 In the Select Devices window, select the device type, ScanStation or Embedded. If you select
ScanStation , the list of available devices displays the available ScanStations. If you select
Embedded , the list displays the available Services Managers.
Note: Although Copy is not supported on ScanStation devices and Fax via Print is not supported
on devices with embedded clients, the software does not keep you from selecting them.
This is because the software does not know what devices will use the group of profiles
you are creating.