Konica Minolta bizhub 36 - Manual (Page 47)

bizhub 42/36 1-41
1.19 Loading paper 1
% Set the size of the paper loaded.
% When [Auto] is selected, the paper size is automatically set.
% If non-standard-size paper is loaded, specify the Paper Size setting.
% For details on specifying the paper size settings, refer to chapter 5 of the [User’s Guide Copy Op-
erations].
4
From the touch panel, select the paper type.
% Press [ ] and [ ] until the desired paper type appears.
% For details on specifying the paper type settings, refer to chapter 5 of the [User’s Guide Copy Op-
erations].
Reference
- Paper of the following types and amounts can be loaded into the tray 1.
Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m
2
to 90 g/m
2
)): Up to 150 sheets
Letterhead: Up to 150 sheets
Colored Paper: Up to 150 sheets
Special Paper: Up to 150 sheets
1 Side Only: Up to 150 sheets
Thick 1 (24-3/16 lb to 39-7/8 lb (91 g/m
2 to 150 g/m 2 )): Up to 20 sheets
Thick 2 (40-3/16 lb to 55-7/8 lb (151 g/m
2
to 210 g/m
2
)): Up to 20 sheets
Transparency: Up to 20 sheets
Postcard: Up to 20 sheets
Envelopes: Up to 10
- Paper of the following sizes can be specified for the tray 1.
Standard-sized paper: 8-1/2 e 14 w, 8-1/2 e 11 w/v,10-1/2e 7-1/4 v, 5-1/2 e 8-1/2 w, A4 v, B5 v,
A5 w, B6 w, A6 w, 4 e 6 w, 8 e 13 w
*
, 16K v
Non-standard-sized paper: Width: 90 mm to 297 mm; Length: 140 mm to 356 mm
* There are six Foolscap sizes: 8-1/2e13-1/2 w,8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w,
220 e 330 mm w and 8 e 13 w. Any one of these sizes can be selected. For details, contact your serv-
ice representative.
d
Reference
For details, refer to chapter 7 of the [User’s Guide Copy Operations].