Konica Minolta bizhub 36 - Manual (Page 65)

bizhub 42/36 2-5
2.1 Basic copy operation 2
4
Type in the desired number of copies.
% To change the number of copies, press the [C] (clear) key, and then type in the desired number.
5
Press the [Start] key.
% To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page
of the original, load the 2nd page and press [Start] key again. Repeat this process until all the pages
have been scanned.
After the last page has been scanned, press [Finish].
% To stop scanning or printing, press the [Stop] key.
% To interrupt the copy job, press the [Interrupt] key.
% To scan the next document while printing (reserve a copy job), position the next document, and then
press the [Start] key.
% For details, refer to chapter 4 of [User’s Guide Copy Operations].