Konica Minolta bizhub 36 - Manual (Page 76)

Basic scan operation 2
2-16 bizhub 42/36
2.4
2
Position the document to be scanned.
% To scan a document that cannot be loaded into the ADF (a thick document or a document on thin
paper), position it on the original glass.
% Insert the document to ADF with the first page upside.
3
Select the destination.
% If destinations are already registered, a registered destination can be selected. For details on regis-
tering destinations, refer to page 6-3 of this manual.
% To directly type in the destination address, press [Direct Input], select the transmission method, and
then type in the destination address.
% A document can be sent to multiple destinations at the same time (Broadcast transmission). For de-
tails on sending a document to multiple destinations, refer to page 6-17 of this manual.
% If necessary, press [Settings], and specify the desired settings. For details, refer to chapter 6 of the
[User’s Guide Scan Operations].
4
Press the [Start] key.
% To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page
of the original, load the 2nd page and press [Start] key again. Repeat this process until all the pages
have been scanned.
After the last page has been scanned, press [Finish].