Konica Minolta bizhub 36 - Manual (Page 59)

bizhub 42/36 1-53
1.21 Replacing consumables 1
Replacing the staple cartridge (Finisher FS-529)
The following procedure describes how to replace the staple cartridge for Finisher FS-529.
NOTICE
When replacing the staple cartridge, be sure to check that the message is displayed. If the staple cartridge
is removed before the message is displayed, it will result in a failure.
Do not remove the remaining staples, otherwise the machine will not be able to staple after the cartridge is
replaced.
4
3
2
1