Konica Minolta bizhub 36 - Manual (Page 75)

bizhub 42/36 2-15
2.4 Basic scan operation 2
d
Reference
The network settings must be specified before scan data can be sent. Network settings should be specified
by the administrator. For easier operation, specify in advance any settings other than the network settings
according to the desired application.
For details, refer to the [User’s Guide Administrator Operations].
2.4.2 Scan to Folder
1
Change the mode.
% Press [Scan to Folder] or press the [Folder] key to display the initial Scan to Folder screen.
% If a screen for entering the user name/account and password appears, type in the necessary infor-
mation, and then press [Login] or press the [Access] key. For details, refer to chapter 4 of the [User’s
Guide Copy Operations].
% For using Authentication Unit AU-201, refer to chapter 9 of the [User's Guide Copy Operations].