Konica Minolta magicolor plus - Manual (Page 22)

E-22
Printing in the same ratio as the sheet surface (Model C-12W)
Model C-12W is the wide type Captureboard which will compress printing in the horizontal direction resulting in crowded print-
ing of the A4 or LETTER size sheet; for example, a circle will become an ellipse. To print in the same aspect ratio as a drawn
diagram, the compression mode will be changed (to suit the paper size according to the sheet surface image). The factory
default setting is the horizontal compression mode.
Printing
Check that the power is turned on (that the display window is lit).
1. While pressing in the Density button, press the
ON/Standby button to switch to the function
settings mode.
"F1" appears on the display window.
2. Press the + or – button (the display switches each
time one of the buttons is pressed) to display "F4",
then press the Save
button to fi nalize.
When "F4" is displayed, the captureboard is in the printing ratio
setting mode.
3. Press the Feed button to select the equal ratio
mode.
Lamps when the captureboard is set to condense
the image in the horizontal direction:
Color mode lamp: Off
Density mode lamp: Lit
Lamps when the captureboard is set to print in
equal ratio:
Color mode lamp: Lit
Density mode lamp: Off
Check that the lamps are lit or off as indicated at " Lamps when the captureboard is set to
print in equal ratio" above, then press the Save
button to fi nalize. The dot next to the
"F4" dot fl ashes for several seconds.
• To restore the captureboard to print with the image condensed in the horizontal
direction, switch the mode so that the lamps are as indicated at "Lamps when the
captureboard is set to condense the image in the horizontal direction", then press
the Save
button.
This completes the setting. Press the ON/Standby button to return to the normal mode.
Dot flashes for several
seconds
Forward / Reverse