Konica Minolta magicolor plus - Manual (Page 6)

E-6
Cleaning
• If the sheet is dirty, wipe it off with a damp, thoroughly
wrung cloth. For tough dirt, use the included cleaning
cloth.
• Do not wipe the Captureboard or sheet with thinner, ben-
zene, alcohol, etc. Doing so could cause discoloration or
damage the sheet.
• Wipe of any marks from markers on the pen tray or the
frame cover using a damp, thoroughly wrung out cloth.
• When the erasing surface of an eraser has become soiled,
exchange the sponge with a spare one, and then use.
Using a soiled eraser will soil the sheet surface, and it will
be difficult to remove the soiled matter from the sheet.
Handling the CD-ROM
• Do not touch the surface which has no printing (the sur-
face on which the data is recorded). If this surface is dirty
the data will not be read properly.
Also, do not stick paper, stickers, etc., on the CD-ROM.
• Do not leave for long periods of time in places exposed to
direct sunlight or near heating appliances, and do not drop
or bend the CD-ROM. The disc may get warped, making it
impossible to read the data.
USB Memory
• The USB memory formats supported by the Captureboard
are FAT, and FAT 32. There are also types of USB memo-
ry that cannot be used by this unit. Check the PLUS Vision
web site for types of USB memory that have been verified
to work with the Captureboard.
• As a provision against the unlikely event of a problem with
or disappearance of the data saved in the USB memory,
we recommend that the data be regularly saved to other
media.
• PLUS Vision will not be responsible for the loss of content
stored in the internal memory of this unit (i.e., images that
have been read), or in USB memory.
USB Cables
When using a USB cable other than the one supplied with
the Captureboard, use a USB shielded cable bearing the
USB-IF logo certification. Do not use the Captureboard con-
nected to a USB hub. Improper operation may result.
Important Safety Information
• Note that copying illegal material (tantamount to pos-
session of illegal material) is subject to prosecution.
• This product includes parts considered as “strategic
material” as per the Foreign Exchange and Foreign
Trade Control Act of Japan. Authorization as per said
Act is required to export this product from Japan.