Konica Minolta magicolor plus - Manual (Page 24)

E-24
• The one screen portion that is viewable will be saved in USB memory.
• Saving of the portion located around the sheet surface might not be possible. Please see “Effective reading
size” on Page E-9.
• When the stop position of the sheet is shifted, after the visible screen has been scrolled, the screen is further
scrolled to the correct stop position and stops automatically.
• Do not move the sheet manually.
When the stop position of the sheet is offset, the drawing may not save properly.
• When the stop position of the sheet is shifted, press the Feed
button and set the proper stop position.
Step 3 (continued)
Note
Notice
Press the Color button and select Color or Black & White.
Press the Save button to store
• The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and USB memory storage
starts after the scrolling completes.
Flashing indicator “rotates” sequentially during USB mem-
ory storage operation.
• Depending on the USB memory, it may take time for recognition or it may take time for saving.
• When the ON/Standby
button is pressed during the reading operation, the reading operation will be discon-
tinued and the partially read image data will be stored in the USB memory.
To move the sheet surface, press the Feed button after the scrolling has stopped.
• The image that is projected onto the sheet surface will not be saved to USB memory.
• A press of the Print
button during USB memory storage starts the printing after storage is completed.
• When the wide type (C-12W) Captureboard has been adjusted to the paper size in the horizontal direction, the
image will be compressed to about 75%.
• The date and time of the saved file will reflect the Captureboard time setting. See “Setting the Time” on Page
E-14.
• When a certain amount of free capacity is not available in the USB memory, “FL” will be displayed when the
Save button is pressed. Also, when insufficient free capacity arises during saving, “FL” will be displayed at
that time. Delete the data and return the sheet surface to the original condition, then press the Save button
again.
The (5 second) flashing “US” display indicates that the USB memory has not been inserted. Please
insert the USB memory and then press the Save
button.
A (5 second) flashing “FL” display indicates that there is insufficient free capacity to permit storage
in USB memory. The flashing display will stop when the USB memory device is removed. Replace
with a USB memory device having sufficient capacity.
See “Meaning of Error Messages” on Page E-32 for other error displays.
Color mode lamp
Lit
Printing will be in color.
Unlit Printing will be in black & white.
Display window
Note
Using USB Memory