Konica Minolta magicolor plus - Manual (Page 29)

E-29
Function number
(Display window) Function name Description of function
Selected
mode
Density
mode lamp Color mode
lamp
Not set
Header/footer
Setting of the time stamp written when
saving : By factory default
Header/footer data output :
Original editing *1
Disable
Unlit Lit
Enable
★
Unlit Lit
Erase reminder Sheet rear surface erase reminder function
Disable
★
Unlit Lit
Enable
Unlit Lit
Printing ratio
Setting of image aspect ratio when printing
(Model C-12W)
Compressed
horizontally
★
Unlit Lit
Equal ratio
Unlit Lit
Data rate
Setting of rate for images stored in the mem-
ory and images transferred to the computer
(Model C-12W)
Compressed
horizontally
★
Unlit Lit
Equal ratio
Unlit Lit
Paper size Setting of printing paper size
A4
★
Unlit Lit
Letter
Unlit Lit
Resolution
Setting of resolution for images stored in
the memory and images transferred to the
computer Standard
★
Unlit Lit
High
Unlit Lit
Image format
Setting of format of images stored on the
USB memory device
JPEG
Unlit Lit
PNG
★
Unlit Lit
PDF
Lit Lit
Test print Print captureboard's pre-stored test pattern See page 35
Reset OKI drum counter
Reset the Oki Data B2200n page printer's
drum counter *2
-
Restrict color mode
Setting for disabling printing/storing in the
color mode
Enable
★
Unlit Lit
Disable
Unlit Lit
Factory reset
Reset all the settings to their factory
defaults.
-
Making the Function Settings
Table of Function Numbers, Selected Modes and Lamp Statuses
When at step 2 under "Basic Setting Operations" on the previous page, display the number of the function you
want to set on the display window.
At step 3, check whether the lamps are lit or off as indicated for the desired mode.
★ : Factory defaults.
*1) For instructions on editing the header/footer, see the "Software Operation
Manual".
*2) Only on compatible printers.