Placing paper in the single-document feed tray, Placing paper in the single-document feed tray -8 – Konica Minolta Di351f User Manual
Page 10
Advertising
1
Introduction
1-8
Di251f/Di351f
Placing paper in the single-document feed tray
Use the single document feed tray to feed individual sheets into the
system, such as special paper.
1
Load the original into the document feeder. If necessary, make
additional settings.
2
Lower the single feed tray.
3
Set the guide plates for the paper
width.
4
Lay the sheet of paper directly into
the feed tray. The side that is to be
printed must be down.
5
Specify the paper size and the
paper type.
6
Start a copy cycle by touching
[START]. A print or fax cycle will
start automatically.
Advertising
This manual is related to the following products: