Punch copies, Punch copies -12 – Konica Minolta Di351f User Manual
Page 26
Advertising
2
Copying functions (selection)
2-12
Di251f/Di351f
Punch copies
(Only available if an FN-109 or mailbin finisher is installed.)
Have holes punched in your copies.
1
Make sure the originals are
loaded correctly.
2
Press [FINISHING] in the Basics
menu.
The Finishing settings are shown.
3
Press [HOLE PUNCH].
4
Press the [SELECT POSITION]
key.
The display will change.
Advertising
This manual is related to the following products: