6 placing originals on the glass, Placing originals on the glass -12 – Konica Minolta Di351f User Manual
Page 14
Advertising
1
Introduction
1-12
Di251f/Di351f
1.6
Placing originals on the glass
1
Raise the original cover to at least
15°.
If the original cover is not open wide
enough, the original size will not be
detected automatically.
2
Place the original on the glass. The
side that is to be scanned must be
down.
?
Do you want to send a fax?
➜
Always place the short edge of
the original against the right side
of the original glass (width
scale).
3
Slide the original to the upper right
corner of the original glass.
4
Align the original with the Original
Scales.
5
Close the original cover.
15°
Placing the Fax Original
Placing the Copy Original
Advertising
This manual is related to the following products: