Konica Minolta bizhub C31P - Manual (Page 102)

Configuration Menu Overview 88
AUTO
CON-
TINUE Settings ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON , printing automatically contin-
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 225)/TRAY EMPTY (Page
227)
Different media size/type: PAPER ERROR (Page 225)/TRAY x
PAPER ERR (Page 227)
HOLD
JOB
TIME
OUT Settings DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If
DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY
SAVER Settings ON/OFF
If ON is selected, the machine enters Energy Saver mode
according to the length of time specified for ENERGY SAVER
TIME .
If OFF is selected, the machine will not enter Energy Saver
mode.
ENERGY
SAVER
TIME Settings 5 minutes/6 minutes/7 minutes/8
minutes/9 minutes/10 minutes/11
minutes/12 minutes/13 minutes/14
minutes/15 minutes/30 minutes/
1 hour/3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when ENERGY SAVER is set to
ON .
MENU
TIME
OUT Settings OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If
OFF is selected, no
timeout occurs.