Konica Minolta bizhub C31P - Manual (Page 92)

Configuration Menu Overview 78
AUTO
SET-
TING Settings YES/NO
If YES is selected, auto
configuration of IPv6 is
enabled.
If NO is selected, auto config-
uration of IPv6 is disabled.
LINK
LOCAL Displays the Link-Local
address.
GLOBAL
ADDRESS Displays the global address.
GATE-
WAY
ADDRESS Displays the gateway
address.
NETWARE ENABLE Settings YES/NO
If YES is selected, NetWare is enabled.
If NO is selected, NetWare is disabled.
APPLE
TALK ENABLE Settings YES/NO
If YES is selected, AppleTalk is enabled.
If NO is selected, AppleTalk is disabled.
SPEED/
DUPLEX Settings AUTO/10BASE FULL/10BASE
HALF/100BASE FULL/100BASE
HALF/1000BASE FULL
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
IEEE
802.1X ENABLE Settings YES/NO
If YES is selected, IEEE 802.1X is
enabled.
If NO is selected, IEEE 802.1X is dis-
abled.
MEMORY
DIRECT Settings ENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If ENABLE is selected, memory direct printing is enabled.
If DISABLE is selected, memory direct printing is disabled.