Replacing the transfer belt unit, Replacing the transfer belt unit 157 – Konica Minolta bizhub C31P User Manual
Page 171
Advertising
Replacing Consumables
157
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE
appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Open the printer’s front cover.
2
Remove the print unit and waste
toner bottle.
"
For details on removing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 144 or “Replac-
ing the Waste Toner Bot-
tle” on page 150.
"
Cover the removed print
unit to protect it from
direct sunlight.
Advertising