Konica Minolta PS5000C MKII User Manual
Page 36
Advertising
PS5000C MKII Operator’s Manual
3-10
2.2
Aging - 10min
This adjustment is to stabilize the lamp and the CCD.
NOTE !
It will take time until the lamp is stable especially in the morning in
winter. In such a case, repeat the “Aging – 10min” procedure about
two times.
1
Launch the application and the PS5000C MKII TWAIN Driver.
2
Check “Adjustment” on the screen of the PS5000C MKII TWAIN Driver.
3
Select “1. Aging - 10min” on the pull-down list under “Adjustment”, and then
click “Start”.
4
Click “OK” on the confirmation screen.
5
The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.3 Exposure Time”.
Advertising