Konica Minolta PS5000C MKII - Manual (Page 56)

PS5000C MKII Operator’s Manual
3-30
8. Edit:
This function is active only when “Book” or “Sheet” is selected as the
original type.
• The “Frame Masking” and “Centering” are active during “Book” or
“Sheet” mode.
• The “Finger Masking” is active during “Book” mode.
• The “Center Erase” is active during “Book” or “Sheet” mode.
Note, however, “Auto” cannot be selected during “Sheet” mode.
1. Frame Masking
Masks the outside area of the image with “white”
when a scan size has been selected that is larger
than the original.
NOTE ! • Frame Masking does not function properly when there is an
image less than 2 mm from the edge of the original.
• Depending on the density or color of the original, frame
masking may not function properly. Turn off the frame
masking function if the frame masking function removes any
required portions of the image.
2. Centering Detects when the original is off center and places
the scanned image at the center of the output area.
NOTE ! Centering does not function properly when the center of the
original is 30 mm or more from the center of the book table.
Centering ON Centering OFF
Spread mode
Single or Book
Split mode
Frame Masking: OFF
Frame Masking: ON