Konica Minolta Printgroove - Manual (Page 211)

Drawing Image and Placing Object 6
Printgroove POD Ready 6-31
3
Click [Select Image] - [Browse] in [Property Panel]. Then specify the im-
age file in [Open] dialog appeared and click [Open]. If necessary, click
[Select ICC Profile] - [Browse] to select profile for image to be inserted.
4
If necessary, change the size of the image control box selected using
[Image] property displayed in [Property Panel] or dragging the handles
on the frame of the selected object to the range you want to change.
– Width: You can resize the width of the selected object. This value is
always synchronized with current width of the object.
– Height: You can resize the height of the selected object. This value
is always synchronized with current height of the object.
– Keep the current aspect ratio: You can keep the current aspect ra-
tio. When you resize the one value of width or height, the other val-
ue will be automatically entered with the same aspect ratio of the
current selected object. If the height of the object is changed, the
width is also changed in relation to the original aspect ratio, and