Konica Minolta Printgroove - Manual (Page 226)

Settings 7
Printgroove POD Ready 7-3
2
Click [Startup] tab if [Startup] tab is not displayed.
[Startup] sheet appears.
3
When you launch with Printgroove POD Guide mode, select [Use with
Printgroove POD Guide] and set following items.
– [Server Address]: Enter the IP address of Printgroove POD Guide.
– [User Name]: Enter the User name of the operator (Printgroove POD
Ready user) account with the Printgroove POD Guide.
– [Password]: Enter the Password of the above account.
4
When you launch with Printgroove POD Queue mode, select [Use with
Printgroove POD Queue] and set following items.
– [Server Address]: Enter the IP address of Printgroove POD Queue.
– [User Name]: Enter the User name of the operator (Printgroove POD
Ready user) account with the Printgroove POD Queue.
– [Password]: Enter the Password of the above account.
5
When you launch with Standalone mode, select [Standalone] and set
following items.