Konica Minolta Printgroove - Manual (Page 225)

Settings 7
Printgroove POD Ready 7-2
7.1 Settings
You can set Printgroove POD Ready application related details using [Set-
tings] dialog.
[Settings] dialog contains three tabs as follows;
-
[Startup]: Set the running mode when Printgroove POD Ready is
launched and set [Startup] screen to be shown or not at the Printgroove
POD Ready application startup.
- [Rulers & Units]: Set the unit for Ruler and Text, Grid, Ruler position.
- [Paper]: Set the paper details. These details will be used for calculating
the spine value in [Perfect Binder Cover Designer Wizard].
2
Note
– After rebooting Printgroove POD Ready, the changed settings of
running mode becomes effective.
– When Printgroove POD Ready is rebooted after the running mode
is changed, all jobs saved in the local repository are deleted.
To set [Startup] tab, follow these steps:
1
Select [Edit] - [Settings] menu.
[Settings] dialog appears.