Konica Minolta PageScope Net Care - Manual (Page 32)

3 Using PageScope Net Care Client
21
4. The Discovery Network / Range list shows the local network
associated with the PageScope Net Care server. Whenever the
PageScope Net Care server starts up, it automatically adds the
local network associated with the server to the discovery range list.
If network discovery fails for some reason or if you want to add
other networks, click the
Add button.
Important!
5. Enter a network address and subnet mask.
To specify a range of addresses, type the applicable IP addresses
into
Discovery From and Discovery To .
6. To remove a specific network range from the searched area, select
the network in the
Discovery Network/Range list, and then click
the Remove button. When the confirmation message appears,
click the OK button.
7. If you also want discovery to find other maker’s RFC-1759
Printer-MIB compatible devices, select the check box next to the
Enable Generic Device Discovery option in the Device
Discovery section. Then click the Apply button.
• The local network may not be discovered when PageScope
Net Care is started up while an SNMP agent is running on the
server where PageScope Net Care is installed. If this happens,
terminate the SNMP agent or add the local network manually
to the discovery range.