Axis Communications 250S - Manual (Page 2)

AXIS COMMUNICATIONS <Product Name> Quick User’s Guide
AXIS 250S User’s Manual 2
About This Document
This manual is intended for administrators and operators
of the AXIS 250S MPEG-2 Video Server, and is applicable
for firmware release 3.0. Later versions of the document
will be posted to the Axis Web site, as required.
Previous experience of networking will be of use to the
reader when installing and using this product. Some
knowledge of UNIX or Linux-based systems would also be
beneficial, for developing custom programming scripts
and applications.
Safety Notices
Please observe all safety notices when using this product.
Caution! - Potential hazard that can damage the product.
Important! - Potential hazard that can seriously impair
operation.
Do not proceed beyond any of the above notices until you
have fully understood the implications.
Legal Considerations
Camera surveillance may be prohibited by laws that vary
from country to country. Check the laws in your local
region before using the AXIS 250S for surveillance.
The AXIS 250S includes 3 viewer licenses. The
installation of more than 3 instances of the viewer is
prohibited. To purchase further licenses, please contact
your Axis reseller.
Electromagnetic Compatibility (EMC)
USA -
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving
antenna. Increase the separation between the equipment
and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV
technician for help.
Shielded (STP) network cables must be used with this unit
to ensure compliance with the class B limits.
Europe -
The AXIS 250S fulfills the requirements for
radiated emission according to limit B of EN55022:1998.
When using the Line input, the AXIS 250S also meets the
requirements for immunity according to EN55024:1998
residential, commercial, and light industry. The Mic input may
be subject to interference from nearby radio transmissions.
For best performance, use the Line input.
Liability
Every care has been taken in the preparation of this manual.
Please inform your local Axis office of any inaccuracies or
omissions. Axis Communications AB cannot be held responsible
for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN
Manager, Linux, Macintosh, Microsoft, Netscape Navigator,
OS/2, UNIX, Windows, WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
Axis Communications AB is independent of Sun
Microsystems Inc.
Axis Support Services
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:
•
Download user documentation and firmware updates.
• Find answers to resolved problems in the FAQ database.
Search by product, category, or phrases.
• Report problems to Axis support staff by logging in to
your private support area.
Visit the Axis Support Web at www.axis.com/techsup/
AXIS 250S MPEG-2 Video Server User’s
Manual.
Revision 1.01
Part No: 19194
Dated: August 2002
Copyright © Axis Communications AB,
2002