Axis Communications 250S - Manual (Page 34)

Administration & System Options AXIS 250S User’s Manual 34
As well as the log files, the following are also available:
• The Server Report - The Server Report displays a listing of important information about the
AXIS 250S. If you need to contact the Axis Support desk for help with a problem, please include
this report with your query.
• The Parameter List - This link displays a listing of all of the AXIS 250S's parameters and their
current settings. This list should also be included when requesting help from the support desk.
The Factory Default Settings
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 250S. This is performed in one of two ways:
• By clicking the Restore button from the Maintenance page under System Options. This
action will reset most of the unit’s parameters but will save the IP-address, the Subnet
mask, the Default Router and the Mac (Ethernet) address.
• By pressing the Factory Default Button, located on the front panel. This option will reset
ALL the parameters currently configured in the unit, i.e. network settings, events, etc.
Follow the instructions below to reinstate the product factory default settings using the
Control Button:
1. Switch off the AXIS 250S by disconnecting the power supply.
2. Press and hold the Factory Default Button pressed, and reconnect the power.
3. Keep the Factory Default Button pressed until the Status Indicator displays yellow (note
that this may take up to 15 seconds), then release the button. When the Status Indicator
displays green (which can take up to several minutes) the AXIS 250S will then have
been reset to its original factory default settings.