AT&T TL7700 - Manual (Page 11)

7
Getting started
Battery charging and connecting charger power
After installing the battery, charge the headset by placing it in
the magnetic charging mount as shown below. The
light turns
on when the headset is charging.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery pack or replacement
battery pack (model BT191665). To order, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
.
In Canada, dial
1 (866) 288-4268
.
Plug the small end of the headset charger power adapter into
the power jack at the bottom of the headset charger. Place the
power cord in the power cord slot.
Plug the headset charger power adapter into an electrical
outlet not controlled by a wall switch. 1.
Insert the headset into the
magnetic charging mount. 2. The magnet holds the top of
the headset in place.
The
light turns on.
3.
Magnetic
charging mount