AT&T TL7700 - Manual (Page 19)

15
Getting started
Headset attachments
Over-the-head band
To attach the head band to the headset:
Remove any headset attachment (earbud excluded) currently
connected to the headset.
Insert the earpiece into the head band ring as shown in Figure 6.
Push the earpiece towards the head band ring until it clicks
into place as shown in Figure 7.
Adjust the head band to fit your head. Adjust and rotate the
angle of the headset until the microphone is pointing towards
your mouth as shown in Figure 8. 1.
2.
3.
4.
NOTES:
To wear on your other ear, rotate the headset within the head band ring.
Firmly grip the padded head band ring with one hand whenever adjusting the
headset microphone up or down (see Figure 8). •
•
Figure 8
Figure 6
Figure 7