AGFA IT SR 24 - Manual (Page 37)

3. Control Panel Keys and Indicators
2-12
Sc
ann
er
Ch
apte
r 2
Lamp Illuminance Key: When this key is pressed together with the Shift Key, the
illumination of the screen is adjusted. When this key is
continuously pressed, the screen is gradually darkened un-
til it is turned OFF. When any key is pressed then, the illu-
mination returns to the maximum level.
Resolution Key: When this key is pressed together with the Shift Key, the
resolution of the Scanner is set.
When the Scanner is connected to the Printer: 4H and 6H
When the Scanner is connected to the PC: 2H, 3H, 4H, 6H
and 8H
* 4H represents 400dpi and 6H represents 600dpi.
Job Recall Key: When this key is pressed together with the Shift Key, the
program registration locations (1J, 2J and 3J) are called.
Each time this key is pressed while the Shift Key is held
down, the display is switched in order of 1J
→ 2J → 3J.
Zoom Key: When this key is pressed together with the Shift Key, the
electrical zoom magnification is set.
Zoom+:
When this key is pressed together with the Shift
Key, the magnification is increased by an incre-
ment of 0.01X (up to 2.00X).
Zoom clr: When this key is held down together with the
Shift Key for one second, the standard magnifi-
cation is resumed.
Zoom-: When this key is pressed together with the Shift
Key, the magnification is decreased by a decre-
ment of 0.01X (down to 0.50X).
Shift Key: Executes an expansion function when being pressed to-
gether with the intended function key.
PC/PR Key: When this key is pressed together with the Shift Key, the
connection to the PC or to the Printer is selected.
* This key is not valid unless the PC interface
cable is
connected to the PC [Optional].
0820771003.book Page 12 Monday, March 19, 2001 2:49 PM