AGFA IT SR 24 - Manual (Page 67)

25. Replacing the Projection Lamp
2-42
Sc
ann
er
Ch
apte
r 2
Insert a new Projection Lamp so that
the mark on its base is facing
upwards. Make sure that the new
Projection Lamp is inserted securely
so that there is no gap between the
Projection Lamp and the Lamp
Socket.
NOTE
Do not touch the reflector mirror surface
of the Projection Lamp. Fingerprints,
smudges or debris should be wiped clean
with a soft, dry cloth.
Insert the new Projection Lamp all
the way into the Lamp Holder.
Slide the Projection Unit back into
the machine.
NOTE
If the Projection Unit is not properly
installed, power will not be supplied and
the machine will not operate.
Turn the Power Switch ON.
4
Mark
5
6
7
0820771003.book Page 42 Monday, March 19, 2001 2:49 PM