Using manual masking, Selecting trimming, Defining the print area – AGFA IT SR 24 User Manual
Page 54: Using manual masking -29, Selecting trimming -29 defining the print area -29, Masking
2-29
Sc
ann
er
Ch
apte
r 2
16. Using Manual Masking
The optional Manual Frame Masking Kit allows you to specify an area for printing of the dis-
played image through two separate features, Trimming and Masking.
Selecting Trimming
Press the (manual) Masking key to
select
(Trimming).
The lights on the panel light up
according to the currently selected
paper size and print position.
NOTE
It is possible to print the area specified by
the green lights.
Defining the Print Area
Define the end points for both the
vertical and horizontal areas of the
image on the screen using the green
lights on the area indication panels.
NOTE
The points defining the vertical and
horizontal area can be selected in any
order.
Blinking lights on the indication panels
indicate an improper entry of the specified
area. Specify the area again.
1
Masking
Auto
Manual
2
ON
ON
A4
(8.5 x 11")
1
0820771003.book Page 29 Monday, March 19, 2001 2:49 PM