Konica Minolta SC-215 - Manual (Page 15)

3-1
3. USING THE SC-215 AS A COPIER
To use the SC-215 as a copier, it is recommended that
you follow these tips:
To use other settings than the one displayed in the Message Display window,
simply press the button again for that setting to select other options.
Note:
(1). An item message in the Message Display Windows ending with a “
∗
“
means the current setting.
(2). The default settings are: A4, Normal Print Quality, 100% ratio, 1 copy.
PRINTER MEMORY
To realize the full functionality of the SC-215, it is recommended to install
adequate memory in your laser printer. If you want to print your document
using Quality mode as your Copy Quality mode, you may need to add more
RAM for your printer as using this feature requires more processing time and
memory.
See the following chart for printer memory recommendations.
It is strongly recommended that you refer to the following table to ensure a
successful color copy.
Copy Quality Document Size Min. Printer Memory
Normal Letter Size
Legal Size 16 MB
32 MB
Quality Letter Size
Legal Size 32 MB
64 MB
If there is not enough memory in your printer, you may probably encounter
the following results:
1. The printer may be unable to print the job.
2. The print quality may not be desirable.