Konica Minolta SC-215 - Manual (Page 81)

9-1
9. TROUBLESHOOTING
If you have any operational problem, please refer to
the following troubleshooting hints.
9.1 QUESTIONS AND ANSWERS
Question: Why does the scanned image always come
out to be too dark?
Answer: 1) Modify the Gamma setting to 1.8 for your
monitor and, when printing, set Gamma to
2.2 for your printer.
2) Use the Brightness setting of the TWAIN
user interface to get a brighter image.
Question: The printer does not print the documents.
Why?
Answer: Pass-through printing may pose a problem
for some printers. It is suggested that you
add a second printer card for printing
purpose, or you may call your authorized
local dealer for further support.
Question: Why does not my GDI printer work with the
SC-215?
Answer: Disable the Auto Scan function in the
application, then your printer will function
normally.