Alamo RHINO SM72 - Manual (Page 98)

OPERATION
SM72 02/10 Operation Section 4-6
© 2012 Alamo Group Inc.
OPERA
T
ION
2.5 Auxiliary Hydraulics
The skid steer must be equipped with Front
Auxiliary Hydraulics. The hydraulic output
capacity of the skid steer must match the
equipped mower drive motor. Reference the skid
steer operator’s manual to determine the hydraulic
output specifications of the skid steer.
A decal is affixed to the mower designating the
mower as equipped with either a High, Medium, or
Low Flow Motor. If the decal is missing or is not
legible, the motor flow volume can be determined
from its part number (found on tag attached to the
motor) using the table below or by contacting
Rhino customer service.
The mower is not shipped equipped with hydraulic
hose coupler ends. Coupler ends must be
purchased from an authorized skid steer dealer to
ensure mower and skid steer auxiliary hydraulic
couplers are compatible.
2.3 Power Unit Safety Devices
If transporting or operating the power unit and implement near a public roadway, the power unit must be
equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible
from the rear of the unit. Lights and an SMV emblem must be equipped directly on implements if the visibility
of the tractor warning signals are obscured.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the power unit or implement. OPS-UPI- 0004
2.4 Hitch
The skid steer must be equipped with a compatible
Standard Universal Quick Mount Hitch to connect
and operate the mower. OPS-SS-0001