Procedure for scanning to mailbox – Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15753 User Manual
Page 6
Scan to Mailbox Setup (Optional)
Copyright © 2007, Xerox Corporation. All rights reserved.
6
Procedure for Scanning to Mailbox
1.
From the device's main screen, press the Scan to Mailbox button.
2.
When the Scan to Mailbox screen displays, a list of Mailboxes will be shown. Use the
supplied arrow to scroll through the icons to locate your Mailbox.
3.
Select your Mailbox by touching its selection line on the touch screen.
4.
When the Passcode screen displays, enter your passcode (series of numbers) using the
Control Panel's numeric keypad.
5.
Press the Confirm button on the touch screen.
6.
Use the displayed controls to set up scanning parameters.
7.
Place your document in the document handler and press
Start
.
8.
Press the Services button to return to the device's main screen.
Note
To retrieve the scanned document to a Windows PC, install the scan driver on the
PC or use CentreWare Internet Services. More information can be found on the
CentreWare Utilities CD-ROM and the "CentreWare Internet Services" chapter of
the User Guide.