Xerox WorkCentre C2424-3833 - Manual (Page 56)

Adjusting Copying Options
WorkCentre® C2424 Copier-Printer
3-11
5. To erase the top edge of the original page:
a. Select Top , then press the Enter button.
b. Scroll to a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0
through 25 mm (in 1 mm increments), then press the Enter button.
6. To erase the bottom edge of the original page:
a. Select Bottom , then press the Enter button.
b. Scroll to a number from 0.0 through 1.0 inches (in 0.1 inch increments) or from 0
through 25 mm (in 1 mm increments), then press the Enter button.
When you select Edge Erase , the right side of the control panel display has a page icon with
shading along the edges that have an edge erase setting.
Note
The factory default is Off ; (edge erase of 0 on all sides).