Xerox WorkCentre C2424-3833 - Manual (Page 92)

Adjusting Printing Options
WorkCentre® C2424 Copier-Printer
5-7
Setting the Print Default Tray
To select the default tray for printing, use either:
■ The control panel
■ CentreWare IS
Note
The printer driver overrides the control panel and CentreWare IS settings.
Using the Control Panel
To select the default tray for printing:
1. On the control panel, press the System Setup button.
2. In the menu, select Job Defaults Setup , then press the Enter button.
3. Select Print Defaults Setup , then press the Enter button.
4. Select Paper Handling Setup , then press the Enter button.
5. Select Paper Source , then press the Enter button.
6. Scroll to the desired tray or Auto Select .
7. Press the Enter button to save the changes.
Using CentreWare IS
To select the default tray for printing:
1. Launch your web browser.
2. Enter your system’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Click the General folder on the left sidebar, then click Printer Defaults.
5. Scroll to Print Mode Settings, then select the tray from the Paper Source drop-down list.
6. Click Save Changes at the bottom of the screen.