Airlink101 AMPS240W - Manual (Page 11)

11
Step 7 At the Wireless Encryption screen you can enter the wireless security settings
of your router. If you do not use encryption, click Disable and then Next. If you are
using encryption, you can get the encryption settings from your router or router
manufacturer and enter them here. Afterwards, click Next.
For
WEP encryption, select WEP and enter your settings into the boxes below.
For WPA-PSK , Select WPA-PSK and enter your Pre-Shared Key into the box. Please
note that the print server only supports TKIP and does not support AES