Airlink101 AMPS240W - Manual (Page 28)

28
E-mail Account
You may assign an E-mail address to the MFP Server, so that your mail of the account can be
printed out directly through the printer (ASCII text only). To enable this function, enter the E-
mail account in the MFP Server E-mail Address frame.
- Incoming E-mail (POP3) Server Address: Enter the server address that is used to receive
your E-mail here.
- Outgoing E-mail (SMTP) Server Address: Enter the server address that is used to send
your E-mail here.
Moreover, if your mail server needs to verify the user when sending E-mail, you have to input
Account Name and Password as well.
E-mail Notification
You can specify the MFP Server to send you an alter message via E-mail when the printer
status is changed. To enable this function, check Yes for the Enable e-mail notification for
printer status changing option. Also, enter the administrator’s E-mail address in the Admin E-
mail Address frame.
E-mail Printing
For you to do E-mail Printing configuration, including:
- E-mail Printing (ASCII Text Only): Allows you enable or disable the E-mail printing in
ASCII text format only.
- Receive E-mail Interval: Allow you to set up a time interval in minute in order to
check/receive E-mail periodically.
After done the configuration, click Save button to restore the new configuration, or Cancel
button to abandon.