Airlink101 AMPS240W User Manual
Page 15
Advertising
15
Step 2
Click OK at the Link Successfully screen. You will see notices appearing in
the bottom right-hand corner of your screen as Windows configures the printer.
Step 3
Once you see a notice that says Your new hardware is installed and ready to
use, go to Start -> Control Panel and double click on Printers and Faxes (
Windows
Vista Users
click on Printers instead of Printers and Faxes).
Step 4
In Printers and Faxes (or Printers) you will see a copy of your printer. Right
click on the copy and click Set as Default Printer.
Congratulations, the configuration is now complete. Remember to repeat all steps in
Section 4 on each of the computers you plan to use with the print server.
Advertising